Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Erwinville, LA

Deck Cleaning for Composite Decking in Erwinville, LA

Low-pressure wash for composite decking. Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards. Typical cost $250-$600.

When we handle deck cleaning for composite decking in Erwinville, LA, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. On composite decking, the method we use is low-pressure wash.

Method and pressure

Low-pressure washCleaning method
Low pressure, often under 1,500 PSI with a wide fan tip, held well back; check your decking brand's care guidePressure

Cleaning solution: A composite deck cleaner recommended by the decking maker.

What to know about cleaning composite decking

Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards. Most manufacturers recommend gentle cleaning, and some limit the pressure that can be used without affecting the warranty.

Avoid: High pressure and narrow tips, which can scar the surface and may void the warranty.

How often: Every year, more often in shade.

Is it time for deck cleaning for composite decking?

  • Gray, weathered boards
  • Green or black growth and slippery spots
  • Stain that is peeling or worn through
  • Dark spots under planters and furniture
  • Mildew between composite boards

What causes the dirt and stains

  • Sun breaking down the wood surface (it turns gray)
  • Shade, leaves and moisture feeding mildew
  • Old stain or sealer wearing unevenly
  • Pollen and dirt trapped in the gaps

What you can do yourself

  • Clear the gaps between boards with a putty knife so water drains
  • Sweep often and keep leaves off the deck
  • Move planters and rugs now and then
  • Check for loose boards, nails and soft spots before anyone washes it

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Furry, gouged wood and lap marks from too much pressure
  • Water and grime blasted onto the house siding
  • Using chlorine bleach on wood, which can damage fibers and fasteners
  • Washing composite decking in a way that voids its warranty

How we handle deck cleaning for composite decking

  1. Inspect the boards, rails and finish
  2. Protect nearby siding and plants
  3. Apply a wood or composite cleaner and let it dwell
  4. Rinse at low pressure, following the grain
  5. Apply brightener on wood and let it dry before any stain

Deck Cleaning for Composite Decking cost in Erwinville, LA

$250-$600Typical range for a typical 200-400 sq ft deck
2-4 hoursTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for composite decking

Local deck cleaning for composite decking for Erwinville, LA

Wood decks and fences in Louisiana mildew fast and can rot where water and leaves sit. Cleaning every year and refinishing every two to three keeps the wood sound.

Spring pollen season in Louisiana coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Besides Erwinville (ZIP code 70729), we handle deck cleaning for composite decking in New Roads (11.9 mi), Port Allen (13 mi), Brusly (13.2 mi) and Baton Rouge (14.5 mi). Call (555) 010-0000 for a free quote in Erwinville.

Deck Cleaning for Composite Decking: frequently asked questions

How much does deck cleaning for composite decking cost in Erwinville, LA?

Deck Cleaning for Composite Decking typically costs $250-$600 for a typical 200-400 sq ft deck, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for deck cleaning for composite decking?

For composite decking: low pressure, often under 1,500 PSI with a wide fan tip, held well back; check your decking brand's care guide. What we avoid: high pressure and narrow tips, which can scar the surface and may void the warranty. The cleaning solution does most of the work, followed by a gentle rinse.

Is deck cleaning for composite decking safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule deck cleaning for composite decking?

Every year, more often in shade. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Erwinville, LA

House Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$700

Commercial Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $400-$2,000

Soft Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $300-$800

Driveway Cleaning

Driveway pressure washing that removes dirt, mildew, tire marks and many oil and rust stains for an even, clean finish.

Typical $150-$400

Roof Cleaning

Soft wash roof cleaning that removes black streaks, moss and lichen without the granule damage pressure washing causes.

Typical $400-$1,000

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Parking Lot & Garage Cleaning

Cleaning parking garages, lots and loading areas to remove oil, grime, gum and litter.

Typical $500-$3,000

Oil Stain Removal for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $100-$300

Pre-Paint Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $250-$600

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

Driveway Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$400

House Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $300-$700

Ready for a cleaner home or business?

Get a free pressure washing quote in Erwinville, LA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote